Summer Special Flat 65% Limited Time Discount offer - Ends in 0d 00h 00m 00s - Coupon code: suredis

F5 201 TMOS Administration Exam Practice Test

Demo: 38 questions
Total 254 questions

TMOS Administration Questions and Answers

Question 1

A BIG-IP Administrator is checking the BIG-IP device for known vulnerabilities. What should the 8IG-IP Administrator upload to BIG-IP iHealth for further analysis?

Options:

A.

QKView

B.

EUD

C.

UCS

D.

tcpdump

Question 2

Where is the loadbalancing mode specified?

Options:

A.

within the pool definition

B.

within the node definition

C.

within the virtual server definition

D.

within the pool member definition

Question 3

When upgrading a BIG-IP redundant pair, what happens when one system has been updated but the other has not?

Options:

A.

Synching should not be performed.

B.

The first system to be updated will assume the Active role.

C.

This is not possible since both systems are updated simultaneously.

D.

The older system will issue SNMP traps indicating a communication error with the partner.

Question 4

What is the purpose of floating self-IP addresses?

Options:

A.

to define an address that grants administrative access to either system at any time

B.

to define an address that allows either system to initiate communication at any time

C.

to define an address that allows network devices to route traffic via a single IP address

D.

to define an address that gives network devices greater flexibility in choosing a path to forward traffic

Question 5

Which statement describes a typical purpose of iRules?

Options:

A.

iRules can be used to add individual control characters to an HTTP data stream.

B.

iRules can be used to update the timers on monitors as a server load changes.

C.

iRules can examine a server response and remove it from a pool if the response is unexpected.

D.

iRules can be used to look at client requests and server responses to choose a pool member to select for load balancing

Question 6

A Virtual Server uses an iRule to send traffic to pool members depending on the URI. The BIG-IP

Administrator needs to modify the pool member in the iRule.

Which event declaration does the BIG-IP Administrator need to change to accomplish this?

Options:

A.

CLIENT_ACCEPTED

B.

HTTP_RESPONSE

C.

HTTP_REQUEST

D.

SERVER_CONNECTED

Question 7

The BIG-IP appliance fails to boot. The BIG-IP Administrator needs to run the End User Diagnostics (EUD)

utility to collect data to send to F5 Support.

Where can the BIG-IP Administrator access this utility?

Options:

A.

Console Port

B.

Internal VLAN interface

C.

External VLAN interface

D.

Management Port

Question 8

A virtual server is configured to offload SSL from a pool of backend servers. When users connect to the virtual server, they successfully establish an SSL connection but no content is displayed. A packet trace performed on the server shows that the server receives and responds to the request. What should a BIG-IP Administrator do to resolve the problem?

Options:

A.

enable Server SSL profile

B.

disable Server SSL profile

C.

disable SNAT

D.

enable SNAT

Question 9

You have created a custom profile named TEST2. The parent profile of TEST2 is named TEST1. If additional changes are made to TEST1, what is the effect on TEST2?

Options:

A.

All changes to TEST1 are propagated to TEST2.

B.

Some of the changes to TEST1 may propagate to TEST2.

C.

Changes to TEST1 cannot affect TEST2 once TEST2 is saved.

D.

When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2.

Question 10

A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool

that uses TCP port 1521.

Where should the BIG-IP Administrator apply this monitor?

Options:

A.

Local Traffic > Profiles » Protocol > TCP

B.

Local Traffic > Nodes > Default Monitor

C.

Local Traffic > Pools > De Pool > Members

D.

Local Traffic > Pools > DB Pool > Properties

Question 11

During a high-demand traffic event, the BIG-IP Administrator needs to limit the number of new

connections per second allowed to a Virtual Server.

What should the administrator apply to accomplish this task?

Options:

A.

An HTTP Compression profile to the Virtual Server

B.

A connection rate limit to the Virtual Server

C.

A connection limit to the Virtual Server

D.

A OneConnect profile to the Virtual Server

Question 12

Which three statements describe a characteristic of profiles? (Choose three.)

Options:

A.

Default profiles cannot be created or deleted.

B.

Custom profiles are always based on a parent profile.

C.

A profile can be a child of one profile and a parent of another.

D.

All changes to parent profiles are propagated to their child profiles.

E.

While most virtual servers have at least one profile associated with them, it is not required.

Question 13

The BIG-IP Administrator creates a custom iRule that fails to work as expected. Which F5 online resource should the administrator use to help resolve this issue?

Options:

A.

DevCentral

B.

Bug Tracker

C.

University

D.

Health

Question 14

A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator

tries to restore a UCS taken from the previous device, but the restore fails. The following error appears

inthe/var/log/itm.

mcpd [****J: •*****»;0; License is not operational (expired or digital signature does not match

contents.)

What should the BIG-IP Administrator do to avoid this error?

Options:

A.

Use the appropriate tmsh command with the no-license option

B.

Revoke the license prior to restoring

C.

Reactivate the license on the new device using the manual activation method

D.

Remove the license information from the UCS archive

Question 15

A BIG-IP device sends out the following SNMP trap:

big-ipo.f5.com - bigipExternalLinkChange Link: 1.0 is DOWN

Where in the BIG-IP Configuration utility should the BIG-IP Administrator verify the current status of Link

1.0?

Options:

A.

System > Platform

B.

Network > Trunks > Trunk List

C.

Statistics > Performance > System

D.

Network > Interfaces > Interface List

Question 16

Assume a virtual server has a ServerSSL profile. What SSL certificates are required on the pool members?

Options:

A.

No SSL certificates are required on the pool members.

B.

The pool members.SSL certificates must only exist.

C.

The pool members.SSL certificates must be issued from a certificate authority.

D.

The pool members.SSL certificates must be created within the company hosting the BIGIPs.

Question 17

A BIG-IP Administrator reviews the log files to determine the cause of a recent problem and finds the

following entry.

Mar 27.07.58.48 local/BIG-IP notice mcpd {5140} 010707275 Pool member 172.16.20.1.10029 monitor

status down.

What is the cause of this log message?

Options:

A.

The pool member has been disabled.

B.

The pool member has been marked as Down by the BIG-IP Administrator.

C.

The monitor attached to the pool member needs a higher timeout value.

D.

The monitor attached to the pool member has failed.

Question 18

A virtual server is listening at 10.10.1.100:80 and has the following iRule associated with it:

when HTTP_REQUEST { if {[HTTP::uri] ends_with "txt" } { pool pool1 } elseif {[HTTP::uri] ends_with "php" } { pool pool2 }

If a user connects to http://10.10.1.100/foo.html, which pool will receive the request?

Options:

A.

pool1

B.

pool2

C.

None. The request will be dropped.

D.

Unknown. The pool cannot be determined from the information provided.

Question 19

The ICMP monitor has been assigned to all nodes. In addition, all pools have been assigned custom monitors. The pool is marked available. If a pool is marked available (green) which situation is sufficient to cause this?

Options:

A.

All of the pool member nodes are responding to the ICMP monitor as expected.

B.

Less than 50% of the pool member nodes responded to the ICMP echo request.

C.

All of the members of the pool have had their content updated recently and their responses no longer match the monitor.

D.

Over 25% of the pool members have had their content updated and it no longer matches the receive rule of the custom monitor. The other respond as expected.

Question 20

A new BIG-IP VE is deployed with default settings. The BIG-IP Administrator completes the setup utility in the Configuration Utility. The internal self IP address fails to respond to a ping request. What is a possible cause of this issue?

Options:

A.

Port lockdown on internal self IP is set to Allow None

B.

Route is NOT assigned to internal self IP.

C.

Internal interface VLAN is set to untagged

D.

Internal interface VLAN is set to tagged

Question 21

Which statement is true concerning iRule events?

Options:

A.

All iRule events relate to HTTP processes.

B.

All client traffic has data that could be used to trigger iRule events.

C.

All iRule events are appropriate at any point in the clientserver communication.

D.

If an iRule references an event that doesn't occur during the client's communication, the client's connection will be terminated prematurely.

Question 22

An LTM device has a virtual server mapped to www5f.com with a pool assigned. The objects are defined

as follows:

Virtual server. Destination 192.168.245.100.443 netmask 255.255.255.0

Persistence: Source address persistence netmask 255.0.0.0

SNAT:AutoMap

Profiles: HnP/TCP

How should the BIG-IP Administrator modify the persistence profile so that each unique IP address

creates a persistence record?

Options:

A.

netmask 0.0.0.0

B.

netmask 255.255.255.255

C.

netmask 255.255.0.0

D.

netmask 255.256.255.0

Question 23

When initially configuring the BIG-IP system using the config utility, which two parameters can be set? (Choose two.)

Options:

A.

the netmask of the SCCP

B.

the IP address of the SCCP

C.

the port lockdown settings for the SCCP

D.

the netmask of the host via the management port

E.

the IP address of the host via the management port

F.

the port lockdown settings for the host via the management port

Question 24

An LTM device has a virtual server mapped to www.f5.com with a pool assigned. Users report that when browsing, they are periodically required to re-login to /resources/201.1.7.b.2_l.com. The objects are defined as follows:

Virtual server. Destination 192.168.245.100:443 netmask 255.255.255.0

Persistence: SSL session persistence

Profiles: HTTP/TCP

Which persistence method should the BIG-IP Administrator apply to resolve this issue?

Options:

A.

Source address affinity

B.

hexadecimal

C.

SIP

D.

Destination address affinity

Question 25

When can a single virtual server be associated with multiple profiles?

Options:

A.

Never. Each virtual server has a maximum of one profile.

B.

Often. Profiles work on different layers and combining profiles is common.

C.

Rarely. One combination, using both the TCP and HTTP profile does occur, but it is the exception.

D.

Unlimited. Profiles can work together in any combination to ensure that all traffic types are supported in a given virtual server.

Question 26

A BIG-IP Administrator applied the latest hotfix to an inactive boot location by mistake, and needs to downgrade back to the previous hotfix.

What should the BIG-IP Administrator do to change the boot location to the previous hotfix?

Options:

A.

Uninstall the newest hotfix and reinstall the previous hotfix

B.

Reinstall the base version and install the previous hotfix

C.

Reinstall the previous hotfix and re-activate the license

D.

Uninstall the base version and restore the UCS

Question 27

A site is load balancing to a pool of web servers. Which statement is true concerning BIG IP's ability to verify whether the web servers are functioning properly or not?

Options:

A.

Web server monitors can test the content of any page on the server.

B.

Web server monitors always verify the contents of the index.html page.

C.

Web server monitors can test whether the server's address is reachable, but cannot test a page's content.

D.

Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.

Question 28

A BIG-IP Administrator is configuring a pool with members who have differing capabilities. Connections

to pool members must be load balanced appropriately.

Which load balancing method should the BIG-IP Administrator use?

Options:

A.

Least Sessions

B.

Least Connections (member)

C.

Fastest (node)

D.

Weighted Least Connections (member)

Question 29

Where is connection mirroring configured?

Options:

A.

It an option within a TCP profile.

B.

It is an optional feature of each pool.

C.

It is not configured; it is default behavior.

D.

It is an optional feature of each virtual server.

Question 30

A BIG-IP Administrator creates an HTTP Virtual Server using an iApp template. After the Virtual Server is

created, the user requests to change the destination IP addresses. The BIG-IP Administrator tries to

change the destination IP address from 10.1.1.1 to 10.2.1.1 in Virtual Server settings, but receives the

following error:

The application service must be updated using an application management interface

What is causing this error?

Options:

A.

The Application Service was NOT deleted before making the IP address change.

B.

The IP addresses are already in use.

C.

The Application Services have Strict Updates enabled.

D.

The IP addresses used are NOT from the same subnet as the Self IP.

Question 31

A BIG-IP Administrator plans to upgrade a BIG-IP device to the latest TMOS version.

Which two tools could the administrator leverage to verify known issues for the target versions?

(Choose two.)

Options:

A.

F5 University

B.

F5 Downloads

C.

F5 End User Diagnostics (EUD)

D.

FSiHealth

E.

F5 Bug Tracker

Question 32

The owner of a web application asks the 8IG-IP Administrator to change the port that the BIG-IP device sends traffic to. This change must be made for each member in the server pool named app_pool for their Virtual Server named app_vs. In which area of the BIG-IP Configuration Utility should the BIG-P Administrator make this change?

Options:

A.

Local Traffic > Pools

B.

Local Traffic > Nodes

C.

Network > Interfaces

D.

Local Traffic > Virtual Servers

Question 33

A site needs a virtual server that will use an iRule to parse HTTPS traffic based on HTTP header values. Which two profile types must be associated with such a virtual server? (Choose two.)

Options:

A.

TCP

B.

HTTP

C.

HTTPS

D.

ServerSSL

Question 34

A BIG-IP Administrator contacts F5 Support, which identifies a suspected hardware failure. Which information should the BIG-IP Administrator provide to F5 Support?

Options:

A.

Qkview, EUD output

B.

Qkview, UCS archive, core files

C.

Qkview, part numbers for failed components

D.

Qkview, packet capture, UCS archive

Question 35

A BIG-IP Administrator is setting up a new BIG-IP device. The network administrator reports that the interface has an incompatible media speed. The BIG-IP Administrator needs to change this setting

manually.

From which location should the BIG-IP Administrator perform this task?

Options:

A.

On the Front Console

B.

In the TMOS Shell Command line

C.

In the Configuration Utility, Network > Interface

D.

In the Configuration Utility, System > Configuration

Question 36

You need to terminate client SSL traffic at the BIG-IP and also to persist client traffic to the same pool member based on a BIG IP supplied cookie. Which four are profiles that would normally be included in the virtual

server's definition? (Choose four.)

Options:

A.

TCP

B.

HTTP

C.

HTTPS

D.

ClientSSL

E.

ServerSSL

F.

CookieBased Persistence

Question 37

A BIG-IP Administrator runs the initial configuration wizard and learns that the NTP servers were invalid. In which area of the Configuration Utility should the BIG-IP Administrator update the list of configured NTP servers?

Options:

A.

System > Configuration

B.

System > Services

C.

System > Preferences

D.

System > Platform

Question 38

What is the purpose of provisioning?

Options:

A.

Provisioning allows modules that are not licensed to be fully tested.

B.

Provisioning allows modules that are licensed be granted appropriate resource levels.

C.

Provisioning allows the administrator to activate modules in nonstandard combinations.

D.

Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.

Demo: 38 questions
Total 254 questions