You can unlicense the cluster feature only in
When Data ONTAP creates a weekly, nightly, or hourly snapshot, the value of n (as shown by the UNIX Is command) is adjusted for all the weekly, nightly, or hourly snapshots. The higher the value of n. the_________the snapshot.
What command would you enter to restore the /vol/flexvol0/etc/rc file from a snapshot to the /vol/flexvol0/home directory?
Which one of the following keywords alone can be used to convert an asynchronous mirror to be synchornous?
Which two of the following NetApp storage appliances do not support the use of synchronous SnapMirror?
Which two Interfaces can an administrator use to disable unused Ethernet ports on an ONTAP cluster? (Choose two.)
Which one of the following /etc/snapmirror.conf entries will not support synchronous SnapMirror?
Which RDMA protocol does ONTAP support with NFS using TCP?
For a configuration change to be effective when using the OSSV configurator, the OSSV service must be restarted.
Which one of the following commands would you use to disable client access to snapshots on a volume called /vol/flexvoM?
Refer to the exhibit.
A company has three servers that are using the iSCSI protocol to connect to a two node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. The administrator checks the ONTAP cluster and notices the servers are logging into only the first controller.
Which two steps should the administrator take to troubleshoot the issue? (Choose two.)
In a synchronous SnapMirror configuration, the soui'ce storage appliance exhibits high latency due to user traffic and rapid data change from SnapMirror transactions.Which one of the following tuning methods best resolves this performance behavior? Edit the /etc/snapmirror.conf file on the destination storage appliance and set:
Which one of the following commands or procedures would you use to undo a SnapRestore reversion?
An administrator wants to provide isolation from connected hosts to the same FCP LUN. Which two features accomplish this request? (Choose two.)
When using MetroCluster, identify two methods for restricting access to the disaster site node. (Choose 2)
The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from your primary system.
After issuing the aggr split aggr0/plex0 aggrNew command ____________.
Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
Which one of the following statements does not apply to the SnapMirror visibility-interval variable?
Which command displays the disk ownership for both CPU modules in a FAS270C appliance?
Which one of the following statements is not true of SnapLock volumes?
Refer to the exhibit.
Based on the CPU headroom statistics provided for one node in the cluster, what is the available performance capacity?
When you are setting up SnapMirror, which one of the following is not a replication pre-requisite?
An administrator is troubleshooting connection problems with ONTAP System Manager. The cluster management L1F is on port aOa-33. Web clients on VLAN 33 are able to access System Manager. Web clients on other subnets are unable to reach System Manager.
Which network component should the administrator modify?
What is the minimum number of HA pairs required for Epsilon to be automatically assigned?
Which one of the following would you use to change the NDMP password on the Open System SnapVault agent?
For a configuration change to be effective when using the OSSV configurator, the OSSV service must be restarted.
Which statement describes the results of the snapmirror resync command?
A Resynchronization finds the newest common snapshot shared by the two volumes or qtrees, and removes all newer information on the storage appliance on which the command is run.
B. Resynchronization will cause the loss of all data written to the destination after the original base snapshot was made.
C. Resynchronization will update the snapshot on the source filer
D. Resynchronization will update the snapshot on the destination filer.
Fill in the blank for the following statement: To manage a SnapVault backup through a commercial NDMP application, you must specify a_____authorized through that application.
A volume can contain up to___snapshots concurrently.
When you issue the snapmirror status command, to what does the "Lag" column refer?
NetApp X1024 Fibre Channel HBA is required on the storage systems for IP over Fibre Channel functionality.
N NO: 179
When configuring SyncMirror disk pools, which platforms require disks connected to particular ports and/or FC adapters on particular ports?
When you create a restricted volume to be used as the destination for SnapMirror data replication, which command allows you to check the size of the source and destination volumes?
To restore a primary SnapVault qtree to the exact qtree location on the primary storage system (from which it was backed up), you must:
What does it signify if the disks are "not owned" in a FAS270C appliance?
Which two supported methods would you use to restore data from a SnapVault for NetBackup Volume?
A volume is SnapMirrored hourly. You revert the volume using a snapshot that was created two days ago. Which command continues the relationship?
Which one of the following options will allow a snapmirror storage appliance to mirror from this system?
You have determined that the failure to a MetroChister is a disaster. Which step should you take?
Which one of the following would you use to change the NDMP password on the Open System SnapVault agent?
Which option of the snap restore command allows you to specify a different directory, as long as the directory already exists?
Which two networking components must be configured to failover LIFs across subnets? (Choose two.)
Which ONTAP policy type defines the kind of traffic that Is supported for a LIF?
For aggregates or traditional volume SyncMirror to work correctly, the configuration of each plex must be identical with regard to____________.
A mirrored volume has a failed disk, but there are no available spares in the pool from which the degraded plex was built. Data ONTAP will:
The snapvault update command is only available on the secondary system.
An administrator Is troubleshooting failover to an ONTAP SVM-DR destination cluster. The failover test works but stops replication. The administrator has a requirement to keep SnapMirror replication running while performing the failover test.
What ONTAP feature will accomplish this task?
Exhibit.
An administrator has a NetApp AFF cluster with Cloud Tiering enabled on all data using the snapshot-only policy. When restoring files, users report slow response times.
What is the highest latency seen during restore?
What console message is a good indication that the storage appliance is ready to reinstate the cluster from a previous takeover?
A SnapVault secondary volume can contain up to ______________ Snapshot copies for data protection.
If an error message indicates that the cluster interconnect adapter itself is faulty, what is your corrective action?
Before enabling an active/active configuration, you should verify and compare the configuration of the nodes. Which tool can perform this task?
What are two logical network components of ONTAP? (Choose two.)
Which ONTAP authentication method must be added to enable two-factor authentication to an existing administrator's SSH login?
For DOT 7.3 and higher, which is true about SnapVault or Open Systems SnapVault and deduplication?
In ONTAP 9.12, what allows an S3 permission to read existing NFS files as objects?
Exhibit:
To remove a cluster setup, you must perform the steps displayed in the exhibit.
An administrator Is troubleshooting failed cluster peering between three ONTAP clusters for cascaded SnapMirror replication. Cluster1 is peered to Cluster, cluster^ is peered to Cluster3.
Clusterl and Cluster3 do not have an available route to reach each other. Cluster2 can route to both Cluster1 and Cluster3 using dedicated and separate intercluster LIFs.
What ONTAP network component must be configured on Cluster2 to resolve this issue?
When you are setting up SnapMirror, which one of the following is not a replication pre-requisite?
Which two products can be used to administer Cloud Volumes ONTAP? (Choose two.)
Node 1 in a clustered pair detects that it has lost connectivity to one of its disk shelves. Node 1 is still up, but it cannot see one of its disk shelves. However, the partner node, Node 2, can see all of Node 1s disk shelves. Which one of the following features will cause Node 2 to monitor this error condition for a period of three minutes (by default), and then forcibly take over Node 1 if the error condition persists?
In cluster takeover mode, the shared interface assumes the identity of the
The snapvault snap sched -x command can be used to:
Which ONTAP feature allows the most efficient use of disk space for provisioning root aggregates?
Which tool is available on a non-NetApp primary system to assist in starting or stopping SnapVault, modifying NDMP settings, enabling debugging, and capturing trace files?
Which two of the following statements apply to the fs_size_fixed volume option?
What are two ways that an administrator can define a new consistency group? (Choose two.)
After configuring an ONTAP duster for SAN access, the administrator is notified that the cluster nodes are connected to separate fc switches.
Given the following output:
What action will correct the redundancy issue?
An administrator has an ESXi cluster with VMware VMFS LUNs on an AFF system. Alter troubleshooting performance issues, the administrator determines that timeout best practices are not set on the hosts.
Which NetApp tool would apply the best practice settings?
Which one of the following statements is true of storage appliance SnapVault backup?
Which one of the following actions will cause a currently in sync snapmirror relationship to fall out of sync?