Winter Special Flat 65% Limited Time Discount offer - Ends in 0d 00h 00m 00s - Coupon code: suredis

HP HPE6-A80 Aruba Certified Design Expert Written Exam Exam Practice Test

Demo: 9 questions
Total 60 questions

Aruba Certified Design Expert Written Exam Questions and Answers

Question 1

in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

Options:

A.

The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.

B.

The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails

C.

The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.

D.

The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.

Question 2

Refer to the exhibit.

A customer needs to create a proposal for a full wireless solution for a customer The customer has indicated that the MCs will connect to Aru&a CX Switches at the core and the APs will connect to PoE-i- switches at the edge. The customer requires that the wireless solution support at least 50 Mbps concurrently per AP. The architect has created a BOM tor a Mobility Master (MM), two MC 721os, and 400 AP-535S. me exhibit snows this BOM.

Which components has the architect forgotten?

Options:

A.

SFP+ transceivers tor the MC connections

B.

Smart Rate PoE+ injectors for the APs

C.

Mounting Kits tor the MOs and MM

D.

Sufficient Enterprise licenses for the APs on both MCs

Question 3

What is one piece of additional information architects should obtain from the customer before they design the wireless solution?

Options:

A.

the power requirements for the wireless loT devices and security cameras

B.

the authentication and encryption capabilities for loT devices and security cameras

C.

the distance between the locations where cameras will be installed and the wiring closet on each floor

D.

the average number of users per loT device

Question 4

Refer to the exhibit.

The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:

* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.

* Shelves are 12 feet (3.7 m) high and are typically fully stocked.

This customer indicates that their current wireless performance is inadequate.

What should the network architect include in the new solution to resolve this issue?

Options:

A.

APS deployed on the ceiling in the same current locations, out with dual 5GHz radios

B.

APs deployed on the ceiling in each aisle, due to the high absorption between aisles

C.

APs deployed with directional antennas on the ceiling, due to the high 15-foot callings

D.

APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design

Question 5

A customer has multiple, very small branch sites that require just one or two APs each. The office has a local Internet connection, but all of the traffic is destined To the corporate data center, which has an Aruba wireless solution.

Which branch office solution best meets the customer needs?

Options:

A.

RAPs and no branch office controllers

B.

IAPs and 7005 branch office controllers with an 3D-WAN license

C.

CAPS and 7005 branch office controllers

D.

RAPs and 7005 branch office controllers with an. SD-WAN license

Question 6

Refer to the exhibit.

The network architect has created the 60M shown in the exhibit tor a complete new wired ana wireless solution for a customer. This solution the customer wants to discover and manage every component or the network in Airwave, including twins, MCS, APS, and switches.

How many AirWave licenses dees the architect need to add?

Options:

A.

30

B.

222

C.

7122

D.

6930

Question 7

Refer to the exhibit.

A hotel needs a wireless solution, i he hotel has 802.3af switches.

The architect has selected the 505H Series, controlled by a local MC as the best choice The 5QoH series will need to power a connected phor

which have only a single Ethernet port. The architect has created the BOM shown in the exhibit. (Note that this portion of the BOM does not inc

Which correction should the architect make?

Options:

A.

Change the 5Q5H to the 3Q3HR model.

B.

Remove the mounting adapters.

C.

Propose new direct power source for phone.

D.

Upgrade to PoE+ switches.

Question 8

A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.

What is one Important security action that the wireless solution supports to comply with PCI DSS?

Options:

A.

Use test-practice, factory default settings for security settings and login credentials.

B.

Implement TKIP encryption on the wireless network used by POS devices.

C.

Impose mandatory clean up periods to delete records of user access to controllers

D.

Enforce role-based access control on administrators who access controllers

Question 9

A network architect needs to plan quality of service (QoS) for a hospital network.

Which of these applications should receive the highest priority?

Options:

A.

streaming IPTV in lobbies

B.

cloud-based scheduling software

C.

MRI image transfer

D.

wireless voice communicator devices

Demo: 9 questions
Total 60 questions