Month End Sale Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70percent

Certensure Logo
  1. Home
  2. Hitachi
  3. Hitachi Data Systems
  4. HH0-200 - Certified Modular Integration Specialist exam

Hitachi HH0-200 Certified Modular Integration Specialist exam Exam Practice Test

Demo: 16 questions
Total 109 questions
Get HH0-200 Full Access Download HH0-200 PDF

Certified Modular Integration Specialist exam Questions and Answers

Question 1

A customer needs 2 RKs and 5 RKAs installed in a Hitachi Data Systems?9?rack. What is the total EIA how many railkits does the customer need?

Options:

A.

21U and 7 railkits

B.

26U and 8 railkits

C.

26U and 7 railkits

D.

29.5U and 8 railkits

Question 2

How do you analyze the output of the CTL Alarm Trace file?

Options:

A.

send the CTL Alarm Trace to the TRC to analyze the trace

B.

open the CTL Alarm Trace file in Access to analyze the trace

C.

open the CTL Alarm Trace file with vi editor to analyze the trace

D.

open the CTL Alarm Trace file with text editor to analyze the trace

Question 3

A customer has a Hitachi Thunder 9500V?Series subsystem with the RAID configuration set up as (3D + 1P), and one spare drive. Which statement is true If the number of drive errors exceeds the threshold?

Options:

A.

Host access is interrupted and an I/O error is reported back.

B.

The subsystem shuts down and the failed drive has the failed LED blinking.

C.

Dynamic Sparing occurs for the failed drive and the host access is not interrupted.

D.

Data reconstruction occurs from the parity information on the other drives and host access is not interrupted.

Question 4

Which two statements are true about acquiring performance information on a Hitachi Thunder 9500V?Series subsystem? (Choose two.)

Options:

A.

It can be collected through Resource Manager only.

B.

The name of the output file is of the format perfxx.dat.

C.

The name of the output file is of the format pfmsxx.txt.

D.

It can be collected through Resource Manager and CLI.

Question 5

What are the three modes of operation on Hitachi?Resource Manager GUI? (Choose three.)

Options:

A.

Admin mode

B.

Normal mode

C.

Initial setup mode

D.

Maintenance mode

E.

Management mode

Question 6

Which two tasks does Hitachi Resource Manager?allow you to do? (Choose two.)

Options:

A.

view LUN capacity utilization

B.

view performance information

C.

display controller failure information

D.

downgrade Microcode on the subsystem

Question 7

You are installing Microcode for a new Hitachi Thunder 9570V?subsystem on a rack at a customer site. The customer has an existing Hitachi Thunder 9570V?subsystem, and wants to have an identical configuration on the new subsystem. What three steps should you take to achieve this? (Choose three.)

Options:

A.

perform initial Microprogram installation on the new subsystem using Web Access

B.

upload the system parameters to the new subsystem using the Disk Array Management Program

C.

perform initial Microprogram installation on the new subsystem using the Disk Array Management Program

D.

using the Disk Array Management Program, download the system parameters from the existing subsystem to a file

Question 8

What is the restriction on bending Fibre Channel interface cable for connections on a Hitachi Thunder 9500V?Series subsystem to prevent excessive stress on the cable?

Options:

A.

The long radius for the bend should not be less than 10mm.

B.

The long radius for the bend should not be less than 20mm.

C.

The long radius for the bend should not be less than 30mm.

D.

The long radius for the bend should not be less than 40mm.

Question 9

What is the correct formula for calculating Queue Depth on a Hitachi Thunder 9500V?Series subsystem?

Options:

A.

Queue depth = 256 / No. of ports

B.

Queue depth = 256 / No. of LUNs per port

C.

Queue depth = 256 / No. of LUNs per Host Group

D.

Queue depth = 256 / No. of Host Groups x No. of ports

Question 10

Which three statements are true about installing Microprogram through Web Access on a Hitachi Thunder 9500V?Series subsystem? (Choose three.)

Options:

A.

You can downgrade the version of Microprogram on the subsystem.

B.

You need to run the setup.exe program included with the Microprogram.

C.

You can upgrade as well as update the Microprogram on the subsystem.

D.

Microprogram installation can be performed during host access to the subsystem.

E.

Microprogram installation can be performed in the Normal mode using Web Access.

Question 11

Which two statements are true about Hitachi FlashAccess?software managing cache on a Hitachi Thunder 9500V?Series subsystem? (Choose two.)

Options:

A.

Hitachi FlashAccess?is supported on a dual controller.

B.

Hitachi FlashAccess?is supported on a single controller.

C.

Hitachi FlashAccess?is supported only on RAID 5 and RAID 0+1 LUNs.

D.

Hitachi FlashAccess?is supported only on RAID 0, RAID 1, RAID 5, and RAID 0+1 LUNs.

Question 12

You notice that the EALM LED on the controller is RED. What does this indicate?

Options:

A.

There is a fibre port failure.

B.

There is a controller failure.

C.

There is a cache DIMM failure.

D.

There is an error on the ENC board.

Question 13

HOTSPOT

Click the Task button. Click on the "letter" representing the LED that indicates a failure in the controller.

Options:

Question 14

You have been asked to install a floor model Hitachi Thunder 9570V?subsystem at a customer location on a raised platform. What is the angle of inclination necessary to move the subsystem up the raised platform without damaging it?

Options:

A.

8?or less

B.

10?or less

C.

12?or less

D.

15?or less

Question 15

Which two statements are true about acquiring performance information on a Hitachi Thunder 9500V?Series subsystem? (Choose two.)

Options:

A.

It can be collected through Resource Manager only.

B.

The name of the output file is of the format perfxx.dat.

C.

The name of the output file is of the format pfmsxx.txt.

D.

It can be collected through Resource Manager and CLI.

Question 16

Which environment setting is correct for the NAME.TXT file?

Options:

A.

sysInitial 10.0.0.16

B.

sysName DF600-01

C.

INITIAL sysContact "John"

D.

COMMUNITY public ALLOW ALL OPERATIONS

Load More HH0-200 Questions
Demo: 16 questions
Total 109 questions
Get HH0-200 Full Access Download HH0-200 PDF