Winter Sale Flat 65% Limited Time Discount offer - Ends in 0d 00h 00m 00s - Coupon code: suredis

Certensure Logo
  1. Home
  2. EMC
  3. Storage Administrator
  4. D-VXR-DY-23 - Dell VxRail Deploy 2023

EMC D-VXR-DY-23 Dell VxRail Deploy 2023 Exam Practice Test

Demo: 30 questions
Total 102 questions
Get D-VXR-DY-23 Full Access Download D-VXR-DY-23 PDF

Dell VxRail Deploy 2023 Questions and Answers

Question 1

Which command is used to restart the Loudmouth process on an ESXi node?

Options:

A.

/usr/IibAmiware/loudmouth/bin/loudmouthd restart

B.

systemcti restart loudmouth

C.

/etc/int.d/loudmouth restart

D.

systemcti restart vmware-loudmouth

Question 2

An implementation engineer is deploying a new VxRail cluster What should they confirm before installing the hardware?

Options:

A.

At least 24 in (61 cm) of clearance exists in front of and behind the cabinet

B.

Redundant power zones exist with adequate power cables

C.

Power distribution supports only the power rating of a single node

D.

Service laptop is on the same IP network as the iDRACs

Question 3

What must be used when deploying VxRail with a customer-supplied VDS?

Options:

A.

Deployment Wizard using the configuration file method

B.

Deployment Wizard using the step-by-step method

C.

VxRail API with configuration file

D.

VxRail PowerShell SysBringUp Module

Question 4

Which series of VxRail nodes supports either Intel or AMD processors and either hybrid or All-Flash storage?

Options:

A.

G Series

B.

D Series

C.

E Series

D.

V Series

Question 5

What is a consideration when expanding a VxRail cluster? (Choose two.)

Options:

A.

Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed

B.

Expanding a cluster to 64 nodes requires a 25 GbE network

C.

G Series clusters can be expanded only with G Series nodes

D.

1 GbE must be hybrid and single processor node type

Question 6

Match each VxRail configuration with its related characteristic.

Options:

Question 7

What is a valid 2-node VxRail cluster configuration?

Options:

A.

2x 10 GbE and 2x 25 GbE in a switch configuration and external vCenter

B.

2x 1 GbE and 2x 10 GbE in a direct-connect configuration and external vCenter

C.

2x 1 GbE and 2x 10 GbE in a switch configuration and internal vCenter

D.

2x 10 GbE and 2x 25 GbE in a direct-connect configuration and internal vCenter

Question 8

What is the correct sequence of steps to perform a RASR Factory Reset using an SD card?

Options:

Question 9

The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS. Which settings must be used to ensure successful installation?

Options:

A.

Use the VxRail vCenter Server

Upload a configuration file (JSON)

B.

Join an external vCenter Server

Use the step-by-step method

C.

Use the VxRail vCenter Server

Use the step-by-step method

D.

Join an external vCenter Server

Upload a configuration file (JSON)

Question 10

During the activation of Internal SRS, the implementation engineer receives a message that the deployment has failed What is a possible cause?

Options:

A.

SRS VE Gateway on the same subnet as the VxRail Manager

B.

VxRail status already set to installed' in IB database

C.

Site ID mismatch between the IB database and the SRS Wizard

D.

Witness Gateway not configured following Dell best practices

Question 11

What is the maximum number of supported nodes for a VxRail cluster running on a 1 GbE network?

Options:

A.

4

B.

5

C.

16

D.

32

Question 12

A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades. Which tool must be used to perform the task?

Options:

A.

VxVerify

B.

CloudlQ

C.

SolVe Online

D.

VxRail ACE

Question 13

An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?

Options:

A.

Service laptop must be on the same IP network as the iDRACs

B.

At least 36 in (92 cm) clearance exists in front of and behind the cabinet

C.

Power distribution must support the power rating of a single node

D.

Single power zone must be used with adequate power cables

Question 14

What data protection option is included with VxRail?

Options:

A.

vSphere Replication NetWorker

B.

PowerProtect Software Data Domain Cloud Tier

C.

RecoverPoint for VM vSphere Replication

D.

RecoverPoint for VM Avamar

Question 15

A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local.

Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

Options:

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Question 16

An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?

Options:

A.

Extensive maintenance

B.

Temporary maintenance

C.

Permanent removal of host from cluster

D.

Shutdown of an entire cluster

Question 17

A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?

Options:

A.

Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)

B.

Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)

C.

Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring)

D.

Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy

Question 18

An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.

Use the VxRail simulator to describe why the host is Incompatible.

Note: It is necessary to close (x) the simulator window before you can select a response to this question.

Options:

A.

bmc and bios are running older versions

B.

Insufficient number of vSphere licenses

C.

Firmware of ESXi host needs to be updated

D.

Invalid vCenter 5erver license

Question 19

For which typical activity would the Full data migration setting be used when placing a VxRail host into maintenance mode?

Options:

A.

Temporary maintenance

B.

Rebooting a single ESXi host

C.

Shutting down an entire cluster

D.

Permanently removing host from cluster

Question 20

A systems engineer is deploying a VxRail cluster. They want to ensure that configuration issues can be avoided when expanding this cluster.

Which actions need to be performed?

Options:

A.

Verify VxRail nodes are racked and connected to the ToR switches

Validate the network environment

B.

Validate that no pending and unfinished jobs are running on the servers

Verify that the server and storage components are working properly

C.

Validate that the latest updates and patches are installed in the system

Validate that no pending and unfinished jobs are running on the servers

D.

Verify the configuration settings initially captured in PEQ

Validate the storage environment

Question 21

What is the correct CL! command to collect only the VxRail Manager logs?

Options:

A.

generateFullBundle.py -c

B.

vm-supportsh -c

C.

generateLogBundle py -v

D.

vc-support sh -v

Question 22

What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?

Options:

A.

vSAN operates successfully

B.

Network firewalls are configured correctly

C.

vSAN has sufficient storage capacity

D.

Network performance is sufficient

Question 23

An implementation engineer is expanding an existing VxRail E Series cluster with an additional node The version of the node is not at the current cluster level and is not compatible

What action must be performed before adding the node?

Options:

A.

Order node with correct image

B.

RASR Factory Reset

C.

RASR Factory Image Upgrade

D.

Compute node expansion

Question 24

Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

Options:

A.

PCIe network card must be added to all nodes

B.

Node requires only the same drive configuration

C.

Node hardware must be identical to the other three nodes

D.

New node must be at the same VxRail version as existing nodes

Question 25

A VxRail cluster is being deployed in a DMZ environment. What is the recommended deployment option?

Options:

A.

External vCenter Server with customer-supplied VDS

B.

External vCenter Server with VxRail-deployed VDS

C.

Internal vCenter Server with internal DNS

D.

Internal vCenter Server with external DNS

Question 26

A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code. What is the correct order of steps to complete this task?

Options:

Question 27

What is a consideration when performing a VxRail software upgrade from version 4.7.xxx to version 7.0.xxx?

Options:

A.

External vCenter server must be upgraded after the VxRail is upgraded

B.

vCenter Server requires a temporary IP address on a different subnet before the upgrade

C.

Secure boot must be enabled on the ESXi hosts for a successful upgrade

D.

VxRail Manager VM must be changed to the default name to avoid an upgrade failure

Question 28

What is the correct CLI command to collect only the vCenter logs on VxRail Manager

Options:

A.

vc-support.sh –v

B.

generateFullBundle.py –v

C.

vc-support-bundle.sh –c

D.

generateLogBundle.py –c

Question 29

An implementation engineer is expanding an existing VxRail S Series cluster with an additional node. The version of the node is not at the current cluster level but is compatible.

What procedure would result in the quickest node addition?

Options:

A.

RASR Factory Image Upgrade

B.

Factory Reset

C.

VxRail Node Imaging Management

D.

Compute node expansion

Question 30

What is the minimum number of VxRail nodes required for a vSAN storage policy with RAID-5 (Erasure Coding)?

Options:

A.

3

B.

4

C.

5

D.

6

Load More D-VXR-DY-23 Questions
Demo: 30 questions
Total 102 questions
Get D-VXR-DY-23 Full Access Download D-VXR-DY-23 PDF