Which of the following is NOT a way to interact with NetBackup on appliances?
An administrator is using Storage Lifecycle Policies (SLP) to perform the following operations:
• back up to a local Advanced Disk pool
• duplicate to a local MSDP pool
• replicate to an off-site MSDP pool
• duplicate to an off-site tape library, which needs to be retained for three years
Which retention type should the administrator select for the SLP import operation?
What is the purpose of the Staging Schedule option in the Change Storage Units dialog?
An administrator has created a new policy to back up Windows clients, and has created a single automatic schedule. On the scheduled date, the administrator notices that the backup job fails to launch automatically as expected.
Which debug log file should the administrator view to determine why the backup job failed to launch?
Which command should an administrator use to show a list of incomplete copies of lifecycle managed images?
An administrator has a master server running over 50,000 jobs per day.
What can the administrator do to reduce the load on the master server?
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
Where can an administrator change a disk pool to Down status in the NetBackup Administration Console?
An administrator has a master server named master1. When the administrator runs the bpclntcmd -pn command on the client, the administrator receives the following output:
bpclntcmd -pn
expecting response from master2
client_01.domain.com client_01 192.168.0.30 3815
What is a possible cause for this output?
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes are frozen?
Which communication protocol and port does the Appliance Management Server use to communicate with Appliance Management agents?
A Windows policy protects over 100 servers using the directive ALL_LOCAL_DRIVES. The backup window for this policy is a two-hour window that is unused by any other policy. When the jobs run, each server has no more than ten paths, and the overall performance of the disk storage unit is degraded.
Which setting should the administrator modify to ensure only ten jobs write concurrently to the disk storage unit during the backup window?
An administrator needs to enable the media server to detect backup anomalies. To do this, the administrator needs to copy the NB_Anomaly.db file from the anomaly_detection folder on the primary server to the anomaly_detection folder on the media server. On which path can the administrator locate the anomaly_detection folder in the primary server?
How can you interact with NetBackup on appliances?
An administrator has a backup policy with the following policy attributes:
• 3 paths listed in the Backup Selections list
• 5 clients listed in the Clients list
• " Allow multiple data streams " is selected
• " Limit jobs per policy " is set to 4
How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to
handle the expected jobs?
An administrator navigates to NetBackup Management > Catalog, and selects Action: Import. After clicking the Search Now button, the following message appears:
INF - Found no images matching the selection criteria that were ready for phase 2 import.
Which step must the administrator perform in order to get search results?
Which two tasks can be performed from the Appliance Web Console? (Select two.)
What is the name of the command that lets you configure the logging levels for different NetBackup processes?
What are the security risks associated with NetBackup appliances?
What is the Certificate Authority (CA) for NetBackup?
What does an administrator need to enable Smart Meter?
What is the name of the feature that lets you configure data buffer parameters for NetBackup appliances using Appliance Web Console (AWC)?
Backups to a storage device fail with the following error message:
Disk storage server is down (2106)
The storage server is an OpenStorage (OST) host, and the master server and media server are both acting as media servers under Credentials > Storage Servers in the NetBackup Administration Console. The disk pool is in an Up state and the storage server is in a Down state. Troubleshooting confirmed the OST plug-ins on the servers are mismatched.
Which command should an administrator use to check the plug-in version installed on the servers?
An administrator has a Linux client that has a backup job failing with the following error message:
bpbrm Exit: client backup EXIT STATUS 41: network connection timed out
Which step should the administrator perform to ensure the backup job completes successfully?
What is the name of the command that lets you manually duplicate a backup image to another storage unit in NetBackup?
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing
adequately. What should the administrator modify to improve performance for the client?
What is the purpose of the checkpoint restart feature in NetBackup?
What are the two types of backup duplication solutions that NetBackup supports?
What is the name of the feature that allows NetBackup to use a single storage server for multiple media servers or clients?
Upon arriving at work on a Monday, an administrator sees several replication jobs that have failed with the following error message:
no images were successfully processed
Which two reasons may be the cause for the error code? (Choose two.)
A NetBackup device has reported an error with the message " Media error: 0x00000001 " . What does this error mean?
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is greyed out and therefore unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
Which of the following is NOT a function of Anomaly Detection?
Which steps should an administrator perform to run an upgrade pre-check for multiple Windows and Linux clients using VxUpdate, without performing the upgrade?
An administrator runs the following command on the primary server to test connectivity to a client:
bptestbpcd -client clientA
The administrator receives the following message:
< 16 > bptestbpcd main: Function ConnectToBPCD (clientA) failed: 25 cannot connect on socket
Which two reasons may cause this error message? (Select two.)
A tape library had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters that were used before the firmware upgrade?
After creating a NBU-Catalog type backup policy, an administrator receives the following message:
“DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.”
Which two options are available to the administrator to ensure the DR file is available for future use? (Select two.)
Which of the following is NOT a type of update that can be installed on a NetBackup appliance?
An administrator has a NetBackup Appliance that failed to CALL HOME during an unexpected hard drive failure.
Which two reasons may have prevented CALL HOME from working? (Choose two.)
An administrator wants to look at configuration information: status, drivers loaded, port and device information and connections to remote appliances for all Fibre Channel HBAs installed on an appliance.
Which NetBackup Appliance Shell Menu (CLISH) command should the administrator use to display the information?
What is the name of the command that lets you expire a backup image manually in NetBackup?
Which two options are available to an administrator to bring the MSDP catalog back online in the case of a hardware problem that caused corruption? (Select two.)
What happens if the “Maximum data streams” property is enabled in the General tab of Client Attributes for a particular client?
An administrator is creating a Standard policy with the option “Use Accelerator” to back up files on a Linux server.
Which two options are disabled by default in this type of policy? (Choose two.)
A new storage shelf is added to an existing appliance.
Which command under Manage > Storage must the administrator perform first after a new shelf is connected to the appliance and the appliance is powered on?
How can you prioritize, cancel, suspend, resume, restart, retry, or manually run backup and duplication jobs?
What is the name of the utility that queries the host and gathers appropriate diagnostic information about NetBackup and the operating system?
After creating a NBU-Catalog type backup policy, an administrator receives the following message:
DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.
Which two options are available to the administrator to ensure the DR file is available for future use? (Choose two.)
What is the role of storage unit groups in NetBackup?
Which command can an administrator execute on a Windows NetBackup client to measure disk backup performance?
What are the two types of encryption that NetBackup supports for backup data?
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
What is the name of the file that contains the disaster recovery information for the NetBackup catalog?
Which guide should be referred to for configuring deduplication options in NetBackup 10.1?
An administrator wants deduplication clients in a remote office to perform backups so less data is sent over the wide area network (WAN).
Which action should the administrator perform to reduce the total amount of data sent over the WAN?
Which command should an administrator run to display all images written to both disk and tape for a particular client?
What is the name of the command-line interface that lets you configure and manage NetBackup appliances?
What is the name of the command that lets you verify the integrity of a backup image in NetBackup?
Which backup storage is unsupported with media server load balancing?
What are the two levels of load balancing that can occur with AdvancedDisk storage in NetBackup?
A NetBackup appliance is not backing up data as expected. What steps can be taken to troubleshoot the problem?
Refer to the exhibit.
A backup policy uses a Full backup schedule with a schedule type of Frequency: 1 days. The start window for the schedule is configured as shown in the exhibit:
The administrator runs a manual backup at 10:00 on Thursday.
When will the next backup run, if all prior backups completed successfully?
A NetBackup backup job has failed with the status code 701. What does this status code mean?
What is the name of the command that lets you view the status codes and their descriptions in NetBackup?
Which command is used by VxUpdate to upgrade clients?
An administrator configures a policy to perform file system backups of multiple client systems using the “Allow multiple data streams” feature. All other policy attributes are at default settings.
Which master server host property must be configured to enable the backup job from all clients to run concurrently?
What is the name of the command that lets you import a backup image from another NetBackup domain in NetBackup?
A backup job fails with the status code of 96. To troubleshoot the failure, the administrator wants to view the application log files written by the NetBackup Resource Broker.
Which command should the administrator run to find the date, time and actual message text from the log file?
Which action is performed by the NetBackup deduplication plug-in?
Which feature is compatible with the NBU-Catalog policy type?
An AdvancedDisk storage unit consistently reaches capacity, causing older, staged backups to expire.
How can the administrator control the prioritization of images that get removed?
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing adequately.
What should the administrator modify to improve performance for the client?
A NetBackup appliance is not backing up data from a specific client. What steps can be taken to troubleshoot the problem?
A NetBackup client has reported an error with the message " Unable to connect to the NetBackup server " . What could be the cause of this error?
Which utility is least helpful when troubleshooting network connectivity issues that exist between a media server and a client?
What is the purpose of the NetBackup 10.0 Release Notes?
Which of the following resources can be used to tune NetBackup Appliances using the Appliance Web Console?
Where can an administrator add or list the service providers for cloud storage?