Labour Day Special Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 70percent

Certensure Logo
  1. Home
  2. Cisco
  3. CCT Data Center
  4. 010-151 - Supporting Cisco Datacenter Networking Devices

Cisco 010-151 Supporting Cisco Datacenter Networking Devices Exam Practice Test

Demo: 20 questions
Total 136 questions
Get 010-151 Full Access Download 010-151 PDF

Supporting Cisco Datacenter Networking Devices Questions and Answers

Question 1

After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.

Which four options should be verified? (Choose four.)

Options:

A.

Verify the power source to the equipment.

B.

Check for loose HDD cables.

C.

Reseat the DIMMs, CPU, and PCI cards.

D.

Verify that power supplies are receiving power.

E.

Reseat the mezzanine card connector.

F.

Check the CPU sockets for bent pins.

G.

Check the Cisco IMC for fan faults.

Question 2

Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.)

Options:

A.

Check that the front I/O dongle is properly seated.

B.

Check the front I/O cable connection to the motherboard.

C.

Check for memory subsystem failure.

D.

Verify the power source to equipment.

E.

Reseat the DIMMs, CPU, and PCI cards.

Question 3

Refer to the exhibit.

Which Cisco MDS chassis supports the 48-Port 16-Gbps Fibre Channel Switching Module?

Options:

A.

MDS 9509

B.

MDS 9513

C.

MDS 9710

D.

MDS 9506

Question 4

What is Platform as a Service?

Options:

A.

It configures, manages and develops networking environment for your application.

B.

It is when an application service is delivered over the network on a subscription basis.

C.

It is where servers and virtual machines (VMs), network and storage are delivered over the network on a pay-as-you-go basis.

D.

It is the software development framework and components delivered over the network on a pay-as-you-go basis.

Question 5

Which processor option is supported in the Cisco UCS C420 M3 Server?

Options:

A.

up to two Intel Xeon E5-4600 series multicore processors

B.

up to two Intel Xeon E7-4800 series multicore processors

C.

up to four Intel Xeon E5-4600 series multicore processors

D.

two or four Intel Xeon E7-8800 series multicore processors

Question 6

Which Cisco UCS Virtual Interface Card Series is designed exclusively for the M5 generation?

Options:

A.

M81KR VIC

B.

VIC 1400 Series

C.

VIC 1300 Series

D.

VIC 1200 Series

Question 7

Refer to the exhibit.

Which item does A represent?

Options:

A.

Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers

B.

Virtual Interface Card for Cisco UCS B420 M3 Blade Servers

C.

mLOM for Cisco UCS B420 M3 Blade Servers

D.

Virtual Emulex Adapter Card for Cisco UCS B420 M3 Blade Servers

E.

SuperCap module for Cisco UCS B420 M3 Blade Servers

Question 8

Which fiber optic cable type is used most often with a Subscriber connector?

Options:

A.

dual-mode

B.

single-mode

C.

straight-mode

D.

multi-mode

E.

subscriber-mode

Question 9

Which tool does a network administrator not need when installing hardware?

Options:

A.

cable tester

B.

wrench set

C.

cable wraps

D.

needle-nose pliers

E.

PCMCIA memory

F.

soldering iron with grounded tip

Question 10

Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node? (Choose two.)

Options:

A.

8 NVIDIA SXM2 V100 32G modules with NVLink interconnect

B.

AMD EPYC 7000 series processors, with up to 32 cores per socket

C.

2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory

D.

Optional dual USB ports for increased storage or boot drive capacity

E.

Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node

Question 11

Refer to the exhibit.

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server?

Options:

A.

A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED.

B.

A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED.

C.

A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED.

D.

A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED.

Question 12

Which statement is true about QSFP?

Options:

A.

The four 10 Gbit/sec channels that QSFP+ supports can be combined into a single 40 Gigabit Ethernet link.

B.

QSFP-DD stands for Quad Small Form Factor Pluggable Double Distance.

C.

The QSFP+ offers higher data speed than QSFP28.

D.

100GBASE-SR4 supports a much longer distance than 100GBASE-LR4.

Question 13

Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt?

switch(boot) #"

Options:

A.

exec -> admin-password

B.

connect local-mgmt -> admin-password

C.

configure terminal -> admin-password

D.

connect nxos -> admin-password

E.

admin-password

Question 14

What is the correct path to verify the Overall Status of Chassis 1 | Server 3?

Options:

A.

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab

B.

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

C.

Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab

D.

Servers Tab > Chassis > Server 3 General tab

E.

Status Tab > Chassis > Chassis 1 > Servers > Server 3

F.

Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab

Question 15

Which Cisco MDS model supports the most Fibre Channel ports per chassis?

Options:

A.

MDS 9513

B.

MDS 9509

C.

MDS 9506

D.

MDS 9250i

Question 16

What is the maximum distance that the 40GBASE-LR4 Ethernet standard can span?

Options:

A.

550 m

B.

10 km

C.

40 km

D.

80 km

Question 17

What is the name of the process to automatically upgrade a new Fabric Interconnect when it is connected to the functioning Fabric Interconnect?

Options:

A.

Firmware Policy Process

B.

Auto-Negotiate Process

C.

Auto-Sync Process

D.

Firmware Update Process

Question 18

Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)

Options:

A.

FTPS

B.

FTP

C.

TFTP

D.

RSH

Question 19

Refer to the exhibit.

What is the name of this Cisco MDS 9700 Series network module?

Options:

A.

Cisco MDS 9700 48-port 16-Gbps switching module

B.

Cisco MDS 9700 48-port 32-Gbps Fibre Channel switching module

C.

Cisco MDS 48-Port 10-Gbps Fibre Channel over Ethernet module

D.

Cisco MDS 24-/10-port SAN Extension module

Question 20

Which two commands display the version of Cisco NX-OS code that the device is currently running on? (Choose two.)

Options:

A.

show version

B.

show module

C.

show interface

D.

show boot

E.

show license

Load More 010-151 Questions
Demo: 20 questions
Total 136 questions
Get 010-151 Full Access Download 010-151 PDF