Massive Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: netdisc

Brocade 170-010 Brocade Certified vRouter Engineer Exam Practice Test

Demo: 12 questions
Total 85 questions

Brocade Certified vRouter Engineer Questions and Answers

Question 1

Which term is a definition of a VLAN?

Options:

A.

a collision domain

B.

a broadcast domain

C.

a routing domain

D.

a switching domain

Question 2

vyatta@vyatta:~$ show dhcp server leases

IP address Hardware Address Lease expiration Pool Client Name

---------- ---------------- ---------------- ---- -----------

10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20 ClientLAN

10.224.7.41 d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-34

vyatta@vyatta:~$ show dhcp server statistics

pool pool size # leased # avail

---- --------- -------- -------

ClientLAN 11 2 9

vyatta@vyatta:~$

Based on the output shown, which statement is true?

Options:

A.

The address lease interval is 24 hours.

B.

10.224.7.40 is the first address in the pool named Windows.

C.

The pool named ClientLAN has 11 total addresses.

D.

PC-HR-34 is connected directly to the vRouter.

Question 3

Some of your internal users are complaining that they can't get to the mail server at 10.6.7.22.

Looking at the firewall rulebase in the exhibit, what is the problem?

Options:

A.

You don't have a rule allowing traffic to the host at 10.6.7.22.

B.

Rule 20 blocks traffic from an internal subnet to hosts on 10.6.7.0/24.

C.

No traffic has matched rule 30.

D.

You don't have a rule allowing mail traffic to subnet 10.6.7.0/24.

Question 4

You want to capture all traffic traversing an Ethernet switch on your workstation for protocol monitoring.

What must you do?

Options:

A.

Connect your workstation to a VLAN trunk port on the switch.

B.

Place the card on your workstation into promiscuous mode.

C.

Connect your workstation to an analyzer port on the switch.

D.

Configure the switch to forward all traffic to your switch port.

Question 5

vyatta@VYA1:~$ show ip route ospf

O 192.168.12.0/24 [110/1] is directly connected, eth2, 00:07:36

O 192.168.13.0/24 [110/1] is directly connected, eth3, 00:07:36

O *> 192.168.23.0/24 [110/2] via 192.168.12.2, eth2, 00:05:05

*> [110/2] via 192.168.13.3, eth3, 00:05:05

O 192.168.101.0/24 [110/1] is directly connected, eth1, 00:07:36

O *> 192.168.128.0/24 [110/2] via 192.168.12.2, eth2, 00:05:53

O *> 192.168.129.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53

O *> 192.168.130.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53

O *> 192.168.131.2/32 [110/11] via 192.168.12.2, eth2, 00:05:53

O *> 192.168.160.0/24 [110/2] via 192.168.13.3, eth3, 00:05:05

O *> 192.168.161.3/32 [110/11] via 192.168.13.3, eth3, 00:05:05

O *> 192.168.162.3/32 [110/11] via 192.168.13.3, eth3, 00:05:05

O *> 192.168.163.3/32 [110/11] via 192.168.13.3, eth3, 00:05:05

vyatta@VYA1:~$ show ip route summary

IP routing table name is Default-IP-Routing-Table(0)

IP routing table maximum-paths is 8

Route Source Networks

connected 7

static 1

ospf 9

Total 17

FIB 9

vyatta@VYA1:~$

With all routing settings at system defaults, which statement is true about the interface VYA1 will use to transmit traffic destined for 192.168.23.15?

Options:

A.

Only interface Ethernet 2 will be used.

B.

Only interface Ethernet 3 will be used.

C.

The Brocade Vyatta device will load-balance packet by packet out both Ethernet 2 and Ethernet 3.

D.

The Brocade Vyatta device will load-balance session by session out both Ethernet 2 and Ethernet 3.

Question 6

vyatta@vyatta:~$ show system login users

Username Type Tty From Last login

operator vyatta hvc0 Mon Jun 17 18:34:25 2013

vyatta vyatta pts/0 10.224.7.101 Wed Jun 19 20:47:39 2013

vyatta@vyatta:~$

Based on the output, which statement is true?

Options:

A.

User operator last connected through the device console.

B.

User vyatta is currently logged in to the system.

C.

User vyatta last connected using SSH.

D.

User operator has read-only privileges.

Question 7

vyatta@training:~$ show system commit

0 2013-05-03 21:07:54 by root via boot-config-loader

1 2013-05-03 00:05:32 by vyatta via cli

2 2013-05-02 23:15:23 by vyatta via cli

3 2013-04-08 17:57:48 by root via boot-config-loader

4 2013-03-12 18:08:45 by vyatta via cli

5 2013-01-22 22:56:04 by vyatta via cli

6 2012-11-04 02:36:36 by root via boot-config-loader

7 2012-10-12 16:15:36 by vyatta via cli

8 2012-10-11 16:23:08 by vyatta via cli

9 2012-09-10 18:51:06 by vyatta via cli

10 2012-09-04 23:56:28 by vyatta via cli

11 2012-08-31 23:25:35 by vyatta via cli

12 2012-08-31 23:08:05 by vyatta via cli

13 2012-08-31 23:07:32 by vyatta via cli

14 2012-08-31 23:06:56 by vyatta via cli

15 2012-08-31 03:38:53 by vyatta via cli

16 2012-08-31 03:37:15 by vyatta via cli

17 2012-08-31 03:03:53 by vyatta via cli

18 2012-06-22 04:58:47 by vyatta via cli

19 2012-06-20 19:48:08 by vyatta via cli

vyatta@training:~$

Based on the output, which two statements about this Brocade Vyatta vRouter are true? (Choose two.)

Options:

A.

This vRouter has been upgraded three times

B.

The administrator vyatta has read-write privileges to the device.

C.

The last changes made to the device were made by the administrator vyatta.

D.

The last changes saved on this system were saved on 2013-05-03.

Question 8

vyatta@vyatta:~$ show dhcp server leases

IP address Hardware Address Lease expiration Pool Client Name

---------- ---------------- ---------------- ---- -----------

10.224.7.40 00:04:f2:02:84:49 2013/06/22 17:46:20 ClientLAN

10.224.7.41 d4:be:d9:1b:ed:9e 2013/06/22 20:27:26 ClientLAN PC-HR-34

vyatta@vyatta:~$ show interfaces

Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down

Interface IP Address S/L Description

--------- ---------- --- -----------

eth0 192.168.200.254/24 u/u

eth1 192.168.100.1/24 u/u

eth2 10.224.7.1/25 u/u

eth3 172.24.42.1/24 u/u

lo 127.0.0.1/8 u/u

::1/128

Based on the output shown, which statement is true?

Options:

A.

DHCP is configured on eth2.

B.

PC-HR-34 is the first device connected to eth2.

C.

The pool named ClientLAN has 11 total addresses.

D.

The lease interval is 24 hours.

Question 9

A user has read-write access to a Brocade Vyatta vRouter.

Which two commands will display the current device configuration? (Choose two.)

Options:

A.

vyatta@vyatta:~$ show configuration

B.

vyatta@vyatta# show

C.

vyatta@vyatta# sh conf

D.

vyatta@vyatta# show config

Question 10

Which three statements about the configuration file are true? (Choose three.)

Options:

A.

The file is organized hierarchically.

B.

The file is named config.boot.

C.

The system only supports one active configuration file.

D.

You cannot delete the file.

E.

The file is encrypted.

Question 11

Which two elements must be configured on your Brocade Vyatta vRouter to use the upgrade system image command? (Choose two.)

Options:

A.

an active IP interface

B.

a system DNS server

C.

your Brocade support credentials

D.

your Brocade Vyatta repository credentials

Question 12

Which operation allows a firewall to understand complex protocols and pass related traffic automatically?

Options:

A.

statefulness

B.

application layer gateway

C.

access list

D.

allow related traffic

Demo: 12 questions
Total 85 questions